问题描述
之前有用的ThinkWiki pages看起来已经过时了。我正在尝试永久更改我的TrackPoint灵敏度和速度设置,并启用鼠标中键滚动。我过去曾尝试过configure-trackpoint,但设置没有永久保存(重启后会丢失)。
我试过gpointing-device-settings
。使用它,我可以让鼠标中键滚动工作,但我无法更改跟踪点的速度或灵敏度设置。我尝试过的ThinkWiki页面上的所有方法都不能按照Ubuntu 11.04的指示工作。有人可以解释如何永久编辑TrackPoint设置,以便我可以正确使用它吗?
最佳解决方案
不幸的是,似乎没有简单的方法。我将描述如何创建一个新的Upstart作业,以通过/sys下的虚拟文件系统设置引导时的值。
-
找到跟踪点的设备路径
在gnome-terminal中运行以下命令(按
Alt
+F2
,键入gnome-terminal
,然后按Enter
):find /sys/devices/platform/i8042 -name name | xargs grep -Fl TrackPoint | sed 's/\/input\/input[0-9]*\/name$//'
在我的情况下,这将返回
/sys/devices/platform/i8042/serio1/serio2
– 在以下步骤中更改为它返回的任何内容。 -
查找灵敏度和速度的值
在gnome-terminal中运行以下命令:
echo 220 | sudo tee /sys/devices/platform/i8042/serio1/serio2/sensitivity
灵敏度为220(这将询问您的密码),以及
echo 100 | sudo tee /sys/devices/platform/i8042/serio1/serio2/speed
速度为100.一旦找到适合您的值,请使用Upstart作业永久更改:
-
创建一个新的udev规则
现在我们需要在系统启动期间应用设置。因此,按
Alt
+F2
,键入gksu gedit /etc/udev/rules.d/trackpoint.rules
,然后按Enter
(这将询问您的密码)。然后粘贴以下内容:SUBSYSTEM=="serio", DRIVERS=="psmouse", WAIT_FOR="/sys/devices/platform/i8042/serio1/serio2/sensitivity", ATTR{sensitivity}="220", ATTR{speed}="110"
(更新)由于不推荐使用
WAIT_FOR
,因此在较新的系统上,您可以使用DEVPATH
代替:SUBSYSTEM=="serio", DRIVERS=="psmouse", DEVPATH=="/sys/devices/platform/i8042/serio1/serio2", ATTR{sensitivity}="220", ATTR{speed}="110"
保存文件,然后重新启动或运行上面的命令:
sudo udevadm control --reload-rules sudo udevadm trigger
次佳解决方案
那么,是什么帮助我让触控点变得更加敏感。
1.简易方法是在终端做:
$ xinput --list --short
你会看到这样的东西:
omicron@omicron:~$ xinput --list --short
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint id=10. [slave pointer (2)]
⎜ ↳ ImPS/2 Generic Wheel Mouse id=12 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint id=9 [slave keyboard (3)]
↳ Eee PC WMI hotkeys id=11 [slave keyboard (3)]
2.找到您的跟踪点设备。在我的情况下,它是id = 10。
3.然后在终端:
$ xinput --set-prop "10" "Device Accel Constant Deceleration" 0.5
“10”这里是设备ID(Lite-On技术公司的ThinkPad USB键盘,TrackPoint id = 10),在这里放置你的ID,”0.5″是灵敏度级别。您可以通过将大于0的数字放到1000来试验灵敏度。但您可以定义不需要它。数字越小,速度越高。
我用0.4或0.45
4.重要。选择速度后,将最后一个脚本复制到自动启动。
附:如果设置一天停止工作,请再次检查ID。您的设备表可能会有一些更改,ID可能会发生变化。
希望它会对你有所帮助。
享受你的ThinkPad!
第三种解决方案
对于我的Thinkpad T530和Ubuntu 15.10。只需使用:
sudo -i gedit /etc/udev/rules.d/10-trackpoint.rules
然后添加以下内容,然后重新启动。设定值将保留。
ACTION=="add",
SUBSYSTEM=="input",
ATTR{name}=="TPPS/2 IBM TrackPoint",
ATTR{device/sensitivity}="190",
ATTR{device/speed}="180",
ATTR{device/inertia}="6",
ATTR{device/press_to_select}="0"
第四种方案
@ vitaly-dubyna有正确的答案。在debian上,他的方法完美无瑕。为了让您的生活更轻松,请在主目录中放置一个文件.xsessionrc
,其中包含所有设置,以便在每次重新启动后加载它。
制作新文件使用vim
,pico
,gedit
–
vim .xsessionrc
然后坚持这个
xinput set-prop "TPPS/2 IBM TrackPoint" "Evdev Wheel Emulation" 1
xinput set-prop "TPPS/2 IBM TrackPoint" "Evdev Wheel Emulation Button" 2
xinput set-prop "TPPS/2 IBM TrackPoint" "Evdev Wheel Emulation Timeout" 200
xinput set-prop "TPPS/2 IBM TrackPoint" "Evdev Wheel Emulation Axes" 7 6 4 5
xinput set-prop "TPPS/2 IBM TrackPoint" "Device Accel Constant Deceleration" 0.4
前4行是用轨迹点设置垂直和水平滚动,最后一行是控制速度和灵敏度。
请注意,由于设备ID可能会根据BIOS中是否启用某些输入设备而更改,因此最好在引号中使用设备名称。对于大多数thinkpads,TPPS/2 IBM TrackPoint
是参考。
**编辑:** 2015年11月
#get the device ID for the trackpad. We know it contains the string "TPPS"
ibm_trackpad_id=$(xinput | grep 'TPPS' | cut -d"=" -f2 | cut -f1)
echo $ibm_trackpad_id > ~/temp/ibm_trackpad_id
#set desired params for trackpoint
xinput set-prop $ibm_trackpad_id "Evdev Wheel Emulation" 1
xinput set-prop $ibm_trackpad_id "Evdev Wheel Emulation Button" 2
xinput set-prop $ibm_trackpad_id "Evdev Wheel Emulation Timeout" 200
xinput set-prop $ibm_trackpad_id "Evdev Wheel Emulation Axes" 7 6 5 4
xinput set-prop $ibm_trackpad_id "Device Accel Constant Deceleration" 0.15
# get wireless mouse device ID
logitech_mouse_id=$(xinput | grep "Logitech" | cut -d"=" -f2 | cut -f1)
echo $logitech_mouse_id > ~/temp/logitech_mouse_id
# this is device dependent. Map the buttons on your mouse the functionality you want.
xinput set-button-map $logitech_mouse_id 1 2 3 4 5 6 7 9 8 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
# set props for external mouse
xinput set-prop $logitech_mouse_id "Device Accel Constant Deceleration" 1.7
xinput set-prop $logitech_mouse_id "Device Accel Adaptive Deceleration" 2
xinput set-prop $logitech_mouse_id "Evdev Wheel Emulation" 1
xinput set-prop $logitech_mouse_id "Evdev Wheel Emulation Axes" 7 6 5 4
xinput set-prop $logitech_mouse_id "Evdev Wheel Emulation Button" 8
第五种方案
(1)通过xorg.conf.d和udev配置libinput
选项
从Ubuntu 17.10开始,该标准现在是libinput
驱动程序。
它的一些选项可以通过X.org机制进行配置,但需要使用udev规则配置速度和灵敏度以放入内核驱动程序参数。 (请参阅answer by @htorque。)
要配置其他选项,请创建文件/etc/X11/xorg.conf.d/52-trackpoint-tweaks.conf
(或类似名称)。该文件应具有以下内容:
Section "InputClass"
Identifier "Trackpoint tweaks"
MatchProduct "TPPS/2 IBM TrackPoint"
MatchDevicePath "/dev/input/event*"
# The default driver now, so optional to put in this line.
# But does not hurt mentioning where the options will go.
Driver "libinput"
Option "NaturalScrolling" "true"
EndSection
要查看效果,您必须重新启动X.有关其他可用X.org选项的列表,请参阅man(4) libinput。
有关相应(但名称不同)的xinput属性的列表,请参阅xinput --list-prop "TPPS/2 IBM TrackPoint"
或再次使用man(4) libinput。您可以使用这些命令立即使用xinput --set-prop […]
命令测试效果,而无需每次都重新启动X.然后使用52-trackpoint-tweaks.conf
文件中的等效项使更改成为永久更改,如上所示。
(2)通过xorg.conf.d配置evdev
选项
evdev
驱动程序是早期版本的Ubuntu中trackpoint的默认驱动程序,但是从Ubuntu 17.10开始,下面的方法已被弃用,并且不再开箱即用。这是因为evdev
驱动程序现在不再作为libinput
驱动程序安装,如上所述。
如果需要,在使用sudo apt install xserver-xorg-input-evdev
(source)安装驱动程序后,仍然可以使用下面的evdev
解决方案。
一切都可以很好地配置在/etc/X11/xorg.conf.d/52-trackpoint-tweaks.conf
文件中(或类似命名 – 在Ubuntu上,你必须创建目录和文件,但机制可以工作;在某些版本中,其中一个目录名称可能是x11
而不是X11
)。
该文件应具有以下内容:
Section "InputClass"
Identifier "Trackpoint tweaks"
MatchProduct "TPPS/2 IBM TrackPoint"
MatchDevicePath "/dev/input/event*"
# Specify the driver, as else Ubuntu 17.10 will use libinput.
Driver "evdev"
# Configure wheel emulation, using middle button and "natural scrolling".
Option "EmulateWheel" "on"
Option "EmulateWheelButton" "2"
Option "EmulateWheelTimeout" "200"
Option "EmulateWheelInertia" "7"
Option "XAxisMapping" "7 6"
Option "YAxisMapping" "5 4"
# Set up an acceleration config ("mostly linear" profile, factor 5.5).
Option "AccelerationProfile" "3"
Option "AccelerationNumerator" "55"
Option "AccelerationDenominator" "10"
Option "ConstantDeceleration" "3"
EndSection
要查看效果,您必须重新启动X.要在X运行时使用这些设置,请使用xinput
,但请注意选项名称在那里不同。
正如@Vitaly Dubyna所指出的,”Constant Deceleration”可用于控制灵敏度 – 它可以缩小所有移动因子,因此值”3″使所有移动速度比默认”1″慢3倍。
选项文件:
-
evdev driver manual(适用于EmulateWheel选项)