问题描述
以前的JBoss版本包含一个脚本(例如jboss_init_redhat.sh
),可以将其复制到/etc/init.d以便将其添加为服务-因此它将在启动时启动。我似乎在JBoss 7中找不到任何类似的脚本。有人做过这样的事情吗?
附言我正在尝试在Ubuntu 10.04中实现这一目标
最佳办法
在花了几个小时的侦听之后,我最终创建了/etc/init.d/jboss
,内容如下
#!/bin/sh
### BEGIN INIT INFO
# Provides: jboss
# Required-Start: $local_fs $remote_fs $network $syslog
# Required-Stop: $local_fs $remote_fs $network $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Start/Stop JBoss AS v7.0.0
### END INIT INFO
#
#source some script files in order to set and export environmental variables
#as well as add the appropriate executables to $PATH
[ -r /etc/profile.d/java.sh ] && . /etc/profile.d/java.sh
[ -r /etc/profile.d/jboss.sh ] && . /etc/profile.d/jboss.sh
case "$1" in
start)
echo "Starting JBoss AS 7.0.0"
#original:
#sudo -u jboss sh ${JBOSS_HOME}/bin/standalone.sh
#updated:
start-stop-daemon --start --quiet --background --chuid jboss --exec ${JBOSS_HOME}/bin/standalone.sh
;;
stop)
echo "Stopping JBoss AS 7.0.0"
#original:
#sudo -u jboss sh ${JBOSS_HOME}/bin/jboss-admin.sh --connect command=:shutdown
#updated:
start-stop-daemon --start --quiet --background --chuid jboss --exec ${JBOSS_HOME}/bin/jboss-admin.sh -- --connect command=:shutdown
;;
*)
echo "Usage: /etc/init.d/jboss {start|stop}"
exit 1
;;
esac
exit 0
这是java.sh
的内容:
export JAVA_HOME=/usr/lib/jvm/java_current
export PATH=$JAVA_HOME/bin:$PATH
和jboss.sh
:
export JBOSS_HOME=/opt/jboss/as/jboss_current
export PATH=$JBOSS_HOME/bin:$PATH
显然,您需要确保将JAVA_HOME和JBOSS_HOME设置为适合您的环境。
然后我运行了sudo update-rc.d jboss defaults
,以便JBoss在系统启动时自动启动
我发现this article对创建上面的start-up脚本有帮助。同样,以上脚本适用于Ubuntu(在我的情况下为10.04版),因此在Fedora /RedHat或CentOS中使用它可能无法正常工作(注释中的设置与此不同)。
次佳办法
我还拍摄了Ubuntu 10.04 LTS的脚本。 JBoss版本是7.1.1。我想要一个能够真正测试JBoss成功启动并能够相对正常关闭JBoss的脚本。我的起点是JBoss 7.1.1下载的bin /init.d目录中包含的JBoss脚本。我使用了此页面上其他脚本以及其他Ubuntu初始化脚本中的一些内容进行了调整。请注意,Ubuntu使用破折号作为其默认的init-script解释器,而不是JBoss脚本显然期望的bash。具有中等重要性的是,日志记录发生在/var/log/jboss-as
而不是${JBOSS_HOME}/standalone/log
中。该日志还用于确定JBoss是否成功启动。
jboss-as-standalone.sh
#!/bin/sh
#
# JBoss standalone control script
#
# Provided in JBoss AS 7.1.1
# Modified for Ubuntu Server 10.04 by koma
#
# chkconfig: - 80 20
# description: JBoss AS Standalone
# processname: standalone
# pidfile: /var/run/jboss-as/jboss-as-standalone.pid
# config: /etc/default/jboss-as
#
### BEGIN INIT INFO
# Provides: jboss-as
# Required-Start: $local_fs $remote_fs $network
# Required-Stop: $local_fs $remote_fs $network
# Should-Start: $named
# Should-Stop: $named
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Start JBoss AS
# Description: Start JBoss Application Server.
### END INIT INFO
#
# Inspired by tomcat6 init script, might be somewhat redundant
#PATH=???
NAME=jboss-as
DESC="JBoss AS"
DEFAULT=/etc/default/$NAME
# Source function library.
#. /etc/init.d/functions
# Ubuntu has it here (but probably different !)
. /lib/lsb/init-functions
# Load Java configuration.
# Ubuntu has it in /etc/default
[ -r /etc/default/java ] && . /etc/default/java
export JAVA_HOME
# Load JBoss AS init.d configuration.
if [ -z "$JBOSS_CONF" ]; then
# Ubuntu: seems more logical there
JBOSS_CONF="/etc/default/jboss-as"
fi
[ -r "$JBOSS_CONF" ] && . "${JBOSS_CONF}"
# Set defaults.
if [ -z "$JBOSS_HOME" ]; then
JBOSS_HOME="/var/local/jboss-as"
fi
export JBOSS_HOME
# might be unbeautiful
# this made chown fail because JBOSS_USER was empty
if [ -z "$JBOSS_USER" ]; then
JBOSS_USER="jboss"
fi
export JBOSS_USER
if [ -z "$JBOSS_PIDFILE" ]; then
JBOSS_PIDFILE=/var/run/jboss-as/jboss-as-standalone.pid
fi
export JBOSS_PIDFILE
#if [ -z "$JBOSS_CONSOLE_LOG" ]; then
# JBOSS_CONSOLE_LOG=/var/log/jboss-as/console.log
#fi
# use JBOSS_LOG_DIR from jboss script instead
if [ -z "$JBOSS_LOG_DIR" ]; then
JBOSS_LOG_DIR=/var/log/jboss-as
fi
export JBOSS_LOG_DIR
# We need this to be set to get a pidfile !
if [ -z "$LAUNCH_JBOSS_IN_BACKGROUND" ]; then
LAUNCH_JBOSS_IN_BACKGROUND=true
fi
export LAUNCH_JBOSS_IN_BACKGROUND
if [ -z "$STARTUP_WAIT" ]; then
STARTUP_WAIT=120
fi
if [ -z "$SHUTDOWN_WAIT" ]; then
SHUTDOWN_WAIT=120
fi
if [ -z "$JBOSS_CONFIG" ]; then
JBOSS_CONFIG=standalone.xml
fi
JBOSS_SCRIPT=$JBOSS_HOME/bin/standalone.sh
prog='jboss-as'
start() {
log_daemon_msg "Starting $DESC"
id $JBOSS_USER > /dev/null 2>&1
if [ $? -ne 0 -o -z "$JBOSS_USER" ]; then
log_failure_msg "User $JBOSS_USER does not exist..."
log_end_msg 1
exit 1
fi
if [ -f $JBOSS_PIDFILE ]; then
read ppid < $JBOSS_PIDFILE
if [ `ps --pid $ppid 2> /dev/null | grep -c $ppid 2> /dev/null` -eq '1' ]; then
log_progress_msg "$prog is already running"
log_end_msg 0
exit 0
else
rm -f $JBOSS_PIDFILE
fi
fi
mkdir -p $JBOSS_LOG_DIR
# not sure: clear boot.log ... dunno if good, dunno if hardcoding boot.log good
cat /dev/null > ${JBOSS_LOG_DIR}"/boot.log"
# same as for boot.log, but we need to clear server.log to get proper launch detection (grepping later)
cat /dev/null > ${JBOSS_LOG_DIR}"/server.log"
chown -R ${JBOSS_USER}: $JBOSS_LOG_DIR
mkdir -p $(dirname $JBOSS_PIDFILE)
chown ${JBOSS_USER}: $(dirname $JBOSS_PIDFILE) || true
if [ ! -z "$JBOSS_USER" ]; then
start-stop-daemon --start -b -u "$JBOSS_USER" -c "$JBOSS_USER" -d "$JBOSS_HOME" -p "$JBOSS_PIDFILE" -x ${JBOSS_HOME}/"bin/standalone.sh" -- -Djboss.server.log.dir="$JBOSS_LOG_DIR"
else
log_failure_msg "Error: Environment variable JBOSS_USER not set or empty."
log_end_msg 1
exit 1
fi
count=0
launched=false
until [ $count -gt $STARTUP_WAIT ]
do
grep 'JBoss AS.*started in' ${JBOSS_LOG_DIR}"/server.log" > /dev/null
if [ $? -eq 0 ] ; then
launched=true
break
fi
sleep 1
count=$((count+1));
done
if [ $launched=true ]; then
if [ -f $JBOSS_PIDFILE ] && [ -s $JBOSS_PIDFILE ]; then
log_progress_msg "Successfully started $DESC."
else
log_progress_msg "Successfully started $DESC, but problems with pidfile."
fi
else
log_failure_msg "Launching $DESC failed."
# If the pidfile exists, try to kill the process
if [ -f $JBOSS_PIDFILE ] && [ -s $JBOSS_PIDFILE ]; then
read kpid < $JBOSS_PIDFILE
log_progress_msg "Pidfile detected. Please take care of process $kpid manually."
fi
log_end_msg 1
exit 1
fi
# success
log_end_msg 0
return 0
}
stop() {
log_daemon_msg "Stopping $DESC"
count=0;
if [ -f $JBOSS_PIDFILE ]; then
read kpid < $JBOSS_PIDFILE
kwait=$SHUTDOWN_WAIT
# Try issuing SIGTERM
kill -15 $kpid
until [ `ps --pid $kpid 2> /dev/null | grep -c $kpid 2> /dev/null` -eq '0' ] || [ $count -gt $kwait ]
do
sleep 1
count=$((count+1));
done
if [ $count -gt $kwait ]; then
kill -9 $kpid
fi
fi
rm -f $JBOSS_PIDFILE
log_end_msg 0
return 0
}
status() {
if [ -f $JBOSS_PIDFILE ]; then
read ppid < $JBOSS_PIDFILE
if [ `ps --pid $ppid 2> /dev/null | grep -c $ppid 2> /dev/null` -eq '1' ]; then
log_success_msg "$prog is running (pid $ppid)"
exit 0
else
log_success_msg "$prog dead but pid file exists"
exit 1
fi
fi
log_success_msg "$prog is not running"
exit 3
}
reload() {
log_begin_msg "Reloading $prog ..."
start-stop-daemon --start --quiet --background --chuid jboss --exec ${JBOSS_HOME}/bin/jboss-cli.sh -- --connect command=:reload
log_end_msg $?
exit $?
}
case "$1" in
start)
start
;;
stop)
stop
;;
restart)
$0 stop
$0 start
;;
status)
status
;;
reload)
reload
;;
*)
## If no parameters are given, print which are avaiable.
echo "Usage: $0 {start|stop|status|restart|reload}"
exit 1
;;
esac
以及随附的配置(将其放入/etc /default /jboss-as):
# JBoss AS configuration
JBOSS_HOME="/var/local/jboss-as"
JBOSS_USER=jboss
有效的方法(命令,从/etc/init.d/jboss-as
链接脚本后使用sudo service jboss-as <command>
):
-
启动(阻塞,直到服务器成功启动)
-
停止(也阻止)
-
重新开始
-
状态
未测试的内容:
-
如果重新加载正常
-
如果JBoss失败怎么办
-
其他几种可能失败的情况
我还没有深入探讨几个主题,尤其是:
-
set + e /set -e的作用到底是什么,并且是必需的(在其他脚本中使用)
-
log _ * _ msg函数的语义是什么,应在哪里使用?
-
如何正确执行日志记录工作(将位置传递给JBoss)
-
如果jboss-cli.sh脚本可以并且应该用于更多事情(例如启动/运行检测)
-
如果确实有必要一直将standalone.sh作为进程运行
-
如果返回值合适
请注意,我绝对不是shell脚本专家-我相当无知。因此,如果您在代码中发现任何愚蠢的想法,或者对改进有任何想法,我将很高兴听到它们。
第三种办法
最近,我为JBoss AS 7编写了安装程序,该安装程序从RedHat的服务器下载tar.gz文件,将其解压缩,添加jboss-as作为服务并进行一些非常基本的配置。有了它,我可以在几秒钟内准备使用JBoss AS 7。
安装脚本:
#!/bin/bash
#title :jboss-install.sh
#description :The script to install JBoss AS 7.x
#author :Dmitriy Sukharev
#date :20130106
#usage :/bin/bash jboss-install.sh
JBOSS_AS_FILENAME=jboss-as-7.1.1.Final
JBOSS_AS_ARCHIVE_NAME=$JBOSS_AS_FILENAME.tar.gz
JBOSS_AS_DOWNLOAD_ADDRESS=http://download.jboss.org/jbossas/7.1/$JBOSS_AS_FILENAME/$JBOSS_AS_ARCHIVE_NAME
INSTALL_DIR=/opt
JBOSS_AS_FULL_DIR=$INSTALL_DIR/$JBOSS_AS_FILENAME
JBOSS_AS_DIR=$INSTALL_DIR/jboss-as
JBOSS_AS_USER="jboss-as"
JBOSS_AS_SERVICE="jboss-as"
JBOSS_AS_STARTUP_TIMEOUT=240
SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
echo "Cleaning up..."
rm "$JBOSS_AS_ARCHIVE_NAME"
rm "$JBOSS_AS_DIR"
rm -r "$JBOSS_AS_FULL_DIR"
rm -r "/var/run/$JBOSS_AS_SERVICE/"
rm /etc/init.d/$JBOSS_AS_SERVICE
echo "Installation..."
wget $JBOSS_AS_DOWNLOAD_ADDRESS
mkdir $JBOSS_AS_FULL_DIR
tar -xzf $JBOSS_AS_ARCHIVE_NAME -C $INSTALL_DIR
ln -s $JBOSS_AS_FULL_DIR/ $JBOSS_AS_DIR
useradd -s /sbin/nologin $JBOSS_AS_USER
chown -R $JBOSS_AS_USER:$JBOSS_AS_USER $JBOSS_AS_DIR
chown -R $JBOSS_AS_USER:$JBOSS_AS_USER $JBOSS_AS_DIR/
rm $JBOSS_AS_ARCHIVE_NAME
echo "Registrating JBoss as service..."
sed -e 's,${JBOSS_AS_USER},'$JBOSS_AS_USER',g; s,${JBOSS_AS_FILENAME},'$JBOSS_AS_FILENAME',g; s,${JBOSS_AS_SERVICE},'$JBOSS_AS_SERVICE',g; s,${JBOSS_AS_DIR},'$JBOSS_AS_DIR',g' $SCRIPT_DIR/jboss-as.template > /etc/init.d/$JBOSS_AS_SERVICE
chmod 755 /etc/init.d/$JBOSS_AS_SERVICE
echo "Configurating..."
sed -i -e 's,<deployment-scanner path="deployments" relative-to="jboss.server.base.dir" scan-interval="5000"/>,<deployment-scanner path="deployments" relative-to="jboss.server.base.dir" scan-interval="5000" deployment-timeout="'$JBOSS_AS_STARTUP_TIMEOUT'"/>,g' $JBOSS_AS_DIR/standalone/configuration/standalone.xml
sed -i -e 's,<virtual-server name="default-host" enable-welcome-root="true">,<virtual-server name="default-host" enable-welcome-root="false">,g' $JBOSS_AS_DIR/standalone/configuration/standalone.xml
sed -i -e 's,<inet-address value="${jboss.bind.address:127.0.0.1}"/>,<any-address/>,g' $JBOSS_AS_DIR/standalone/configuration/standalone.xml
sed -i -e 's,<socket-binding name="ajp" port="8009"/>,<socket-binding name="ajp" port="28009"/>,g' $JBOSS_AS_DIR/standalone/configuration/standalone.xml
sed -i -e 's,<socket-binding name="http" port="8080"/>,<socket-binding name="http" port="28080"/>,g' $JBOSS_AS_DIR/standalone/configuration/standalone.xml
sed -i -e 's,<socket-binding name="https" port="8443"/>,<socket-binding name="https" port="28443"/>,g' $JBOSS_AS_DIR/standalone/configuration/standalone.xml
sed -i -e 's,<socket-binding name="osgi-http" interface="management" port="8090"/>,<socket-binding name="osgi-http" interface="management" port="28090"/>,g' $JBOSS_AS_DIR/standalone/configuration/standalone.xml
echo "Done."
初始化脚本:
#!/bin/sh
### BEGIN INIT INFO
# Provides: ${JBOSS_AS_SERVICE}
# Required-Start: $local_fs $remote_fs $network $syslog
# Required-Stop: $local_fs $remote_fs $network $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Start/Stop ${JBOSS_AS_FILENAME}
### END INIT INFO
JBOSS_USER=${JBOSS_AS_USER}
JBOSS_DIR=${JBOSS_AS_DIR}
case "$1" in
start)
echo "Starting ${JBOSS_AS_FILENAME}..."
start-stop-daemon --start --background --chuid $JBOSS_USER --exec $JBOSS_DIR/bin/standalone.sh
exit $?
;;
stop)
echo "Stopping ${JBOSS_AS_FILENAME}..."
start-stop-daemon --start --quiet --background --chuid $JBOSS_USER --exec $JBOSS_DIR/bin/jboss-cli.sh -- --connect command=:shutdown
exit $?
;;
log)
echo "Showing server.log..."
tail -500f $JBOSS_DIR/standalone/log/server.log
;;
*)
echo "Usage: /etc/init.d/jboss-as {start|stop}"
exit 1
;;
esac
exit 0
我在blog post中描述了脚本步骤。它还具有用于将此脚本文件下载为存档的链接。